Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
Sunroof / Moonroof Switch: Procedures
SUNROOF SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the roof console assembly.
2. Disconnect the electrical connector.
3. Remove the switch by unsnapping from roof console assembly.
INSTALLATION PROCEDURE
1. Install the switch to roof console assembly by snapping into place.
2. Connect the electrical connector.
3. Install the roof console assembly.
4. Synchronize the sunroof motor. Refer to Sunroof Motor/Actuator Synchronization.