Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
Tighten the bolt to 9 N.m (80 lb in).
8. If necessary, install the air suspension hose at the fill pipe.
9. Install the vent hose (2) to the clip and close the clip at the fill pipe.
10. Lower the vehicle.
11. Install the fuel tank filler housing to fuel tank fill pipe screws.
Tighten the screws to 2.3 N.m (20 lb in).
12. Install the fuel tank filler housing to body TORX(r) screws (1) and retainer (2).
Tighten the screws to 2.3 N.m (20 lb in).