Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
1. Raise and support the vehicle.
Important: Clean the components and the surrounding area to prevent dirt from entering the air system before disconnecting the air hose from the
air compressor.
2. Disconnect the air tube (1) from the air dryer.
3. Disconnect the electrical connection (2).
4. Remove the air inlet and hose (1) from the fuel filler neck bracket.
5. Loosen the mounting nuts.
6. Slide the air compressor (2) rearward to clear the frame slots.
7. Remove the air compressor from the vehicle.
Installation Procedure