Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
![background image](/gmc/yukon/denali_xl_1500_4wd/v8-6.0l_vin_u/Page-1560015.png)
1. Lubricate the inside diameter of the NEW seal with J 36850.
2. Using J 21426 and a soft faced mallet, install the seal.
3. Remove the drain pan.
4. Install the propeller shaft. Refer to Propeller Shaft Replacement - Rear in Propeller Shaft.
5. Fill the transmission to the proper level with DEXRON(R) III transmission fluid. Refer to Transmission Fluid Checking Procedure.