Yukon V8-393 6.5L DSL Turbo (1993)
Installing The Coil Housing
2. Clutch coil (8) to the front head (16).
-
Align the coil and housing assembly on the compressor front head (16) so that the electrical terminals line up the marks scribed on the
compressor.
-
Align the coil locator projections on the coil housing with the holes in the front head (16).
3. Coil and housing retainer ring (7) with J 6435.
Clean
-
Remove any excess adhesive.
4. Pulley and bearing assembly (5 and 6).
5. Clutch plate and hub assembly (2).