Yukon V8-393 6.5L DSL Turbo (1993)
may result.
1. Pitman arm on the pitman shaft. Line up the marks made at removal.
2. Pitman arm washer and nut.
TIGHTEN
^
Pitman arm nut to 250 Nm (184 ft. lbs.).
3. Drag link (31) to the pitman arm ball stud. Make sure the seal is on the stud.
^
Tighten J 29194 to 62 Nm (48 ft. lbs.) to seat the tapers. Remove the tool.
4. Pitman arm nut (38) to the pitman arm ball stud.
TIGHTEN
^
Nut (38) to 54 Nm (40 ft.lbs.).
5. Lower the vehicle.