Yukon 2WD V8-5.7L VIN R (1997)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor (HO2S 2) Testing
A problem with the HO2S 2 electrical circuits should set Diagnostic Trouble Code (DTC) P0137, P0138 or P0140, depending on the specific condition.
If the catalyst is functioning correctly, the HO2S 2 signal will be far less active than that produced by HO2S 1. If a problem exists which causes the
VCM to detect excessive HO2S 2 activity outside of an acceptable range for an extended period of time, the VCM will set DTC P0420, indicating that
the three-way catalytic converter [prime ]s oxygen storage capacity is below a threshold considered acceptable. Refer to DTC P0137 HO2S Circuit
Low Voltage Bank 1 Sensor 2 or DTC P0138 HO2S Circuit High Voltage Bank 1 Sensor 2 or DTC P0140 HO2S Insufficient Activity Bank 1
Sensor 2 or DTC P0420 TWC System Low Efficiency Bank 1. Refer to System Diagnosis / Diagnostic Charts for testing information. See: Testing
and Inspection