Yukon 2WD V8-5.7L VIN R (1997)
Steering Control Module: Service and Repair
REMOVAL
Remove or disconnect the following:
1. Negative battery cable.
2. Knee bolster.
3. I/P auxiliary storage compartment.
4. Ashtray.
5. Electrical connector.
-
Pull down on control module to release.
INSTALLATION
Install or connect the following:
1. Electrical connector.
-
Slide in rear tabs and push up to engage control module.
2. Ashtray.
3. I/P auxiliary storage compartment.
4. Knee bolster.
5. Negative battery cable.