Yukon 4WD V8-4.8L VIN V (2006)
8.
Install the retaining bolts for the brake hose and wheel speed sensor brackets.
Tighten the bolts to 9 N.m (80 lb in).
9.
Connect the ESC link rod to the sensor, if equipped.
10.
Install the tire and wheel.
11.
Remove the safety stands.
12.
Lower the vehicle.
13.
Verify the wheel alignment.
Lower Control Arm Replacement
Lower Control Arm Replacement
^
Tools Required
-
J 43631 Ball Joint Separator
-
J 45851 Ball Joint Separator Protector Adapters
Removal Procedure
1. Raise and support the vehicle.
2. Support the lover control arm with a safety stand.
3. Remove the tire and wheel.
4. Remove the stabilizer shaft links from the lower control arm.
5. Remove the shock absorber lower nut and the bolt.
6. Remove the torsion bars.
7. Remove the wheel drive shaft.