Yukon 4WD V8-5.3L (2008)
6. Position a piece of wood across the piston to be installed.
7. Applying equal pressure by hand while pushing down, install the piston in the bore.
8. Remove the piece of wood.
Notice: Refer to Fastener Notice .
9. Install the bleeder valve in the brake caliper housing.
Tighten the bleeder valve to 12 N.m (106 lb in).
10. Install the bleeder valve cap.
11. Install the brake caliper. Refer to Rear Brake Caliper Replacement (1500 Series) (See: Removal and Replacement/Rear Brake Caliper
Replacement (1500 Series))Rear Brake Caliper Replacement (2500 Series) (See: Removal and Replacement/Rear Brake Caliper Replacement
(2500 Series)) .