Yukon 4WD V8-5.3L (2008)
3. Operate the vehicle within the conditions of the customer's concern while monitoring the fuel pressure with the CH-48027. The fuel pressure
should not drop off during acceleration, cruise or hard cornering.
^
If the fuel pressure drops off, test, inspect, and repair the items listed below. If all items test normal, replace the fuel pump module.
*
Restricted fuel feed pipe
*
Inspect the harness connectors and the ground circuits of the fuel pump for poor connections
4. If the fuel system tests normal, refer to Symptoms - Computers and Control Systems. See: Computers and Control Systems/Testing and
Inspection/Symptom Related Diagnostic Procedures/Symptoms - Engine Controls
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure. See: Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests and Procedures
*
Fuel Hose/Pipes Assembly Replacement (1500 SWB - 98.4L (26 gal) Tank) Fuel Hose/Pipes Assembly Replacement (1500 SWB - 98.4L (26 gal)
Tank + E85) Fuel Hose/Pipes Assembly Replacement (1500 LWB - 117.3L (31 gal) Tank ) Fuel Hose/Pipes Assembly Replacement (1500 LWB -
117.3L (31 gal) Tank + E85)
*
Fuel Injector Replacement
*
Fuel Tank Fuel Pump Module Replacement (1500 Series) Fuel Tank Fuel Pump Module Replacement (1500 SWB - 98.4L (26 gal) Tank + E85)
Fuel Tank Fuel Pump Module Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) Fuel Tank Fuel Pump Module Replacement (2500 LWB -
98.4L (26 gal) Tank-Front) Fuel Tank Fuel Pump Module Replacement (2500 LWB - 43.5L (11.5 gal) Tank-Rear)