Yukon Denali 4WD V8-6.0L Hybrid (2011)
1. Install the new stud into the hub flange hole using firm hand pressure.
2. Install 4 washers to the new wheel stud.
3. Thread a wheel nut onto the new stud with the flat side facing the front hub flange.
4. Tighten the lug nut until the stud contacts the back of the hub flange.
5. Remove the wheel nut.
6. Remove the washers.
7. Install the brake rotor. Refer to Rear Brake Rotor Replacement .
8. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation See: Service and Repair.
9. Remove the safety stands.
10. Lower the vehicle.