Yukon Denali AWD V8-6.2L (2007)
INSTALLATION PROCEDURE
1. Install the air cleaner outlet duct to the throttle body and MAF/IAT sensor. Ensure that the resonator tab aligns with the stud on the intake
manifold.
2. Push down on the air cleaner outlet duct resonator directly over the resonator tab in order to secure the resonator to the stud on the intake
manifold.
3. Tighten the air cleaner outlet duct clamp (2) at the throttle body.
4. NOTE: Refer to Fastener notice.
Tighten the air cleaner outlet duct clamp (1) at the MAF/IAT sensor.
Tighten the clamps to 4 N.m (35 lb in).
5. Install the radiator vent inlet hose retainer to the outlet duct.
6. Install the radiator inlet hose clamp retainer to the outlet duct.
