gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Seat Belts|Page 17729 > < Seat Belts|Page 17727
Page 2
background image

^

Remove the SIR coil from the steering column and allow the coil to hang freely before the shaft is rotated. 

^

Visually inspect the steering shaft for sheared injected plastic (1). If the steering shaft shows sheared plastic, replace the steering shaft.

^

Inspect the steering shaft runout for any frame damage that could cause a bent steering shaft. Using a dial indicator at the lower end of the steering
shaft, rotate the steering wheel. The runout must not exceed 1.60 mm (0.0625 in).

Seat Belts|Page 17729 > < Seat Belts|Page 17727