Yukon XL 2500 2WD V8-6.0L VIN N (2006)
4. Remove the clip retaining hose to sheet metal.
5. Remove the grommet from the sealer plate.
6. Pull the hose away from sheet metal where attached with butyl tape.
7. Remove the hose.
Installation Procedure
1. Install the hose.
2. Re-locate the hose to sheet metal where attached with butyl tape.
3. Install the grommet to sealer plate.
4. Install the clip retaining hose to the sheet metal.
5. Install the hose to nozzles rear, corner and side, assure butyl tape is in position.
6. Install the headliner.
7. Install the center pillar trim.
Roof Drain Channel Replacement
Roof Drain Channel Replacement
Removal Procedure
1. Remove the sunroof glass panel.
2. On one side of the drain channel (1), push the tab (3) rearwards and lift up the drain channel. Do the same for the other side.
3. Slide the drain channel from the guide (2).
Installation Procedure
