Yukon XL 2500 2WD V8-6.0L VIN N (2006)
4. Relieve the tension from the park brake cable by pulling down on the intermediate cable, then release the cable from the equalizer bar.
5. Remove the rear park brake bracket bolt.
6. Remove the park brake cable from the park brake actuator lever.
7. Remove the park brake shoe.
8. Remove the park brake actuator lever housing from the backing plate.
9. Remove the backing plate.
Installation Procedure
1. Install the park brake actuator lever housing to the backing plate.
2. Install the park brake shoe.
3. Adjust the park brake shoe.
