Yukon XL 2500 2WD V8-6.0L VIN N (2006)
2. Using needle nose pliers, compress the locking tabs at the opposite side of the master cylinder.
3. Remove the fluid level sensor.
Installation Procedure
1. Install the fluid level sensor until the locking tabs snap into place.
2. Connect the electrical connector to the fluid level sensor.
Master Cylinder Overhaul
Master Cylinder Overhaul
Caution: Refer to Brake Fluid Irritant in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components in Service Precautions.