Yukon XL 2500 2WD V8-6.0L VIN N (2006)
5. If vehicle is a 1500 series with the first design cable, install the brake cables (2, 3) to the equalizer
6. Remove the safety stands.
7. Lower the vehicle.
8. Adjust the park brake system.
Park Brake Cable Mounting Bracket Replacement
Park Brake Cable Mounting Bracket Replacement
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting..
3. Release the tension on the cables by loosening the nut at the equalizer.
4. Disconnect the rear cables from the equalizer.
5. Remove the rear cables from the mounting bracket by depressing the retaining tabs and pulling rearward.