Yukon XL 2500 2WD V8-6.0L VIN N (2006)
2. Install the ECT sensor.
Tighten the sensor to 20 N.m (15 lb ft).
3. Connect the ECT sensor electrical connector (5).
4. Refill the cooling. Refer to Draining and Filling Cooling System in Cooling System.
GMC Workshop Service and Repair Manuals
Thermostat, Engine Cooling >
< A/T - 4L60-E, 4L65-E Fluid Leak From Bell Housing Area|Page 4284
Page 2
