Yukon XL 2500 2WD V8-6.0L VIN N (2006)
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Disconnect the fuel feed pipe (1) at the fuel rail.
3. Disconnect the evaporative emission (EVAP) canister purge pipe (2).
4. Cap the fuel rail and EVAP pipes.
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
6. Remove the fuel pipe bracket nut.
7. Remove the fuel pipe bracket from the bellhousing stud.
8. Remove the fuel hose/pipe clip from the bracket on the automatic transmission.