Yukon XL 2500 2WD V8-6.0L VIN N (2006)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the automatic transmission.
Important: Note the position and direction of the engine flywheel before removal.
2. Remove the flywheel bolts.
3. Remove the flywheel.
4. Install two M11x1.5 mm bolts (1) to the threaded holes of the spacer, if applicable.
5. Rotate the bolts clockwise to remove the spacer.
6. Remove the spacer from the rear of the crankshaft, if applicable.
