Yukon XL 2500 2WD V8-8.1L VIN G (2004)
![background image](/gmc/yukon_xl_2500_2wd/v8-8.1l_vin_g/Page-3132003.png)
2. Remove the power seat switch to bezel screws.
3. Remove the power seat switch.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the power seat switch to bezel screws.
Tighten the screws to 2 N.m (18 lb in).
2. Install the power seat switch bezel to the seat.