Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Seat Heater Switch: Removal and Replacement
Heated Seat Switch Replacement - Front
Heated Seat Switch Replacement - Front
Removal Procedure
1. Remove the front door trim panel.
2. Disconnect the electrical connector.
3. Release the retaining clips for the front seat heater switch assembly in order to remove the switch.
4. Remove the front seat heater switch assembly.
Installation Procedure
1. Install the front seat heater switch assembly to the front trim panel by pressing the switch into place until the switch is completely seated.
2. Connect the electrical connector to the front seat heater switch assembly.
3. Install the front trim panel.
Heated Seat Switch Replacement - Rear
Heated Seat Switch Replacement - Rear
Removal Procedure
1. Remove the center console end panel.
2. Disconnect the electrical connector.
3. Remove the seat heater switch retaining screws.
4. Remove the switch from the vehicle.
Installation Procedure