Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement - Front
Wheel Speed Sensor Replacement - Front (2WD)
Caution: Refer to Brake Dust in Service Precautions.
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting..
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the brake rotor (2) shown on the 1500 series. Refer to Brake Rotor Replacement - Front in Disc Brakes.
4. Remove the Wheel Speed Sensor (WSS) cable mounting clip from the knuckle.
5. Remove the WSS cable mounting clip from the upper control arm.
6. Remove the WSS cable mounting clip from the frame attachment point.
7. Remove the WSS cable electrical connector.