Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Oil Pan: Service and Repair
Oil Pan Replacement
Removal Procedure
Important: Do not raise the engine by the crankshaft balancer to perform this service procedure. Damage to the crankshaft balancer or the crankshaft
may occur.
1. Remove the front differential, if equipped with Four Wheel Drive (4WD).
2. Remove the starter motor.
3. Remove the oil pan skid plate bolts.
4. Remove the oil pan skid plate.
5. If equipped with Two Wheel Drive (2WD), remove the crossbar bolts.
6. Remove the crossbar.