Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Discharge Air Temperature Sensor / Switch: Service and Repair
Air Temperature Sensor Replacement - Upper Auxiliary
AIR TEMPERATURE SENSOR REPLACEMENT - UPPER AUXILIARY
REMOVAL PROCEDURE
1. Remove the right side C-pillar trim panel.
2. Disconnect the electrical connector from the rear upper A/C temperature sensor (11).
3. Remove the rear upper A/C temperature sensor (11) from the air distribution duct.
INSTALLATION PROCEDURE
1. Install the rear upper A/C temperature sensor (11) to the air distribution duct.
2. Connect the electrical connector to the rear upper A/C temperature sensor (11).
3. Install the right side C-pillar trim panel.