Yukon XL 2500 2WD V8-8.1L VIN G (2004)
6. Connect the CKP sensor electrical connector (4).
7. Position the ignition coil to the rocker cover.
8. Install the driver side rear ignition coil bolts.
Tighten the bolts to 12 N.m (106 lb in).
9. Raise the vehicle
10. Install the fuel line bracket to the bellhousing stud.
11. Install the fuel line bracket nut.
Tighten the nut to 10 N.m (89 lb in).
12. Lower the vehicle.
13. Perform the CKP system variation learn procedure. See: Testing and Inspection/Programming and Relearning