Yukon XL 2500 2WD V8-8.1L VIN G (2004)
3. Install the positive cable nut.
Tighten the nut to 9 N.m (80 lb in).
4. Install the starter lead (4) to the starter.
5. Install the starter lead nut.
Tighten the nut to 3.4 N.m (30 lb in).
6. Position the starter into place.
7. Install the starter bolts.
Tighten the bolts to 50 N.m (37 lb ft).
8. If equipped with 4WD, position the front axle mounting bracket bolt until the bolt is fully seated.
9. If equipped with 4WD, install the front axle mounting bracket nuts.
Tighten the nuts to 95 N.m (70 lb ft).
10. Lower the vehicle.
11. Connect the negative battery cable.