Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the rear bracket to the power steering pump.
^
Tighten the rear bracket retaining nuts to 50 Nm (37 ft. lbs.).
2. Install the power steering pump to the vehicle.
3. Install the pressure hose (2) to the power steering pump.
^
Tighten the hose fitting to 28 Nm (20 ft. lbs.).
4. Install the power steering return hoses (2,4) and retaining clamps to the power steering pump.
5. Install the bolts (1) to the rear of the power steering pump.
^
Tighten the rear bolts to 50 Nm (37 ft. lbs.).