Yukon XL 2500 2WD V8-8.1L VIN G (2004)
1. Install the outer tie rod end to the inner tie rod.
2. Install the outer tie rod end to the steering knuckle.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the outer tie rod end retaining nut to the steering knuckle.
^
Tighten the nut to 55 Nm (40 ft. lbs.).
4. Install the outer tie rod end retaining bracket (2).
^
Tighten the retaining bolts to 65 Nm (48 ft. lbs.).
5. Install the tire and wheel.
6. Perform a four wheel alignment.