Yukon XL 2500 2WD V8-8.1L VIN G (2004)
2. Install the stabilizer shaft link nut to the ball stud.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the stabilizer shaft link nut and bolt to the frame bracket.
3.1.
Tighten the link to frame bracket nut to 65 Nm (48 ft. lbs.).
3.2.
Tighten the ball stud to stabilizer shaft nut to 65 Nm (48 ft. lbs.).
4. Lower the vehicle.