Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Axle Shaft: Service and Repair
(8.6 Inch Axle W/OJL4, 9.5 Inch Axle)
Rear Axle Shaft Replacement (8.6 Inch Axle W/OJL4, 9.5 Inch Axle)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the rear cover and the gasket.
5. Remove the pinion shaft locking bolt.
6. On axles without a locking differential, remove the pinion shaft.
7. On axles with a locking differential, remove the shaft part way. Rotate the case until the pinion shaft touches the housing.