Yukon XL 2500 4WD V8-6.0L VIN N (2006)
5. Install both front console side panel screws (1).
Tighten the screws to 2 N.m (18 lb in).
6. Move both front seats to the fully forward.
7. Install both rear console side panel screws (2).
Tighten the retaining screws to 2 N.m (18 lb in).
8. Reposition the inboard seat track trim (1).
9. Connect the floor console electrical connector.
10. Install the center console end panel.
11. Install the console storage bin.
12. Install the cupholder to the console.
13. Install the upper console bezel.
14. Install the radio amp fuse.
Console Replacement - Overhead
Console Replacement - Overhead
Removal Procedure