Yukon XL 2500 4WD V8-6.0L VIN N (2006)
1. Install the anti-rattle clips to the brake caliper mounting bracket.
2. Install the disc brake pads to the brake caliper mounting bracket.
3. Perform the following procedure before installing the 2 brake caliper mounting bracket bolts.
^
Remove all traces of the original adhesive patch.
^
Clean the threads of the bolts with brake parts cleaner or the equivalent and allow to dry.
^
Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolts.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the brake caliper mounting bracket and the 2 brake caliper mounting bracket bolts.
Tighten the 2 brake caliper mounting bracket bolts to 200 Nm (148 ft. lbs.).
5. Perform the following procedure before installing the 2 brake caliper mounting bolts.
^
Remove all traces of the original adhesive patch.