Yukon XL 2500 4WD V8-6.0L VIN N (2006)
Notice: Refer to Fastener Notice.
7. Tighten the J 41476 mounting bolts until snug. Do not overtighten.
1
Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
2
Tighten the engine rear cover bolts to 25 Nm (18 ft. lbs.).
8. Remove the J 41476.
9. Install a NEW crankshaft rear oil seal.
10. Install the engine flywheel.