Yukon XL 2500 4WD V8-6.0L VIN N (2006)
7. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).
8. Install the inner bearing.
9. Important: Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.
Install the new oil seal using the J 44420 (2) and the J 8092 (1).
10. Install the rotor, if necessary.
11. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
12. Install the wheel hub to the axle housing.
