Yukon XL 2500 4WD V8-6.0L VIN U (2005)
Washer Fluid Level Switch: Service and Repair
WASHER SOLVENT CONTAINER LEVEL SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the washer solvent container.
2. Using a small flat-bladed tool, remove the washer solvent container level sensor (1) and seal (2) from the container.
INSTALLATION PROCEDURE
1. Position the washer solvent container level sensor (1) and the seal (2) to the container by pressing in until fully seated.
2. Install the washer solvent container.
