Yukon XL 4WD V8-5.3L (2011)
Installation Procedure
1. Install the front side door heater switch assembly (2).
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
2. Install the front side door heater switch fasteners and tighten to 2 Nm (18 lb in).
3. Connect the electrical connector.
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement See: Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair/Front Side Door Trim Panel Replacement.
