Yukon XL 4WD V8-5.3L (2011)
6. Install the NEW shock absorber nut (1) and tighten.
*
For vehicles equipped with electronic suspension, tighten the shock absorber nut to 80 Nm (59 lb ft).
*
For vehicles equipped with electronic suspension, tighten the electrical connector to 20 Nm (15 lb ft).
*
For vehicles without electronic suspension, tighten the shock absorber nut to 60 Nm (44 lb ft).
7. Remove the shock absorber assembly from the spring compressor
8. Install the shock absorber in the vehicle. Refer to Shock Absorber and Spring Removal and Installation See: Suspension Spring ( Coil / Leaf
)/Service and Repair/Front Suspension.
Shock Absorber Replacement
Shock Absorber Replacement
Shock Absorber Disposal
Shock Absorber Disposal
Warning