Yukon XL 4WD V8-5.3L (2011)
1. Install the transmission oil cooler lines to the vehicle.
Caution: Do not use air powered tools in order to disassemble or assemble any vehicle component. Bolt torques are vital to diagnosis. You can
detect bolt torques only when using hand tools. Improper bolt torques can contribute to vehicle repair problems.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
2. Install the right shock rear mounting bolt on the lower control arm.
Tighten the bolt to 50Nm (37 lb ft).
