Yukon XL 4WD V8-6.0L (2007)
Blower Motor: Service and Repair
Blower Motor Replacement
BLOWER MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. If equipped, remove the sound insulator panel.
2. Remove the blower motor insulating cover screws.
3. Disconnect the electrical connector from the blower motor.
4. Remove the blower motor insulating cover.
5. Pull the retaining tab down while turning the blower motor counterclockwise in order to disengage the blower motor from the heater/ventilation
module.
6. Remove the blower motor.
INSTALLATION PROCEDURE