Yukon XL Denali 2WD V8-6.2L (2011)
4. Apply a 5 mm (0.20 in) bead of sealant, 20 mm (0.8 in) long to the engine block. Apply the sealant directly onto the tabs of the rear cover gasket
that protrudes into the oil pan surface. Refer to Adhesives, Fluids, Lubricants, and Sealers See: Specifications/Adhesives, Fluids, Lubricants, and
Sealers.
5. Install 1 oil pan bolt into a oil pan bolt hole and up through the gasket.
6. Position and install the oil pan and the rest of the oil pan bolts.
7. Tighten the oil pan bolts until snug.
8. For vehicles with a 6L80-E automatic transmission, position the oil cooler bracket and install the lower right transmission stud until snug.