Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
Brake Rotor/Disc: Technical Service Bulletins
Brakes - Front Rotor Refinishing Equipment
Model
Applicable To
File Under
Bulletin No.
ALL
ALL
SPECIAL
87-034
TOOLS
Issue Date
DEC 18, '87
Front Brake Disc Refinishing Equipment (Supersedes 86-021, Dated October 3, 1986)
The front brake disc refinishing equipment listed below is required to service Honda automobiles (see Section 3.9 of your Automobile Dealer Sales and
Service Agreement).
This equipment replaces Honda Brake Disc Grinders (T/N 07783-0070000 and 07783-0070001), which have been discontinued. Repair of the Honda
Brake Disc Grinder may not be possible because some of the parts are not available. We recommend the purchase of new equipment, which may be
purchased through American Honda's Service and Tool Equipment Program or from the companies listed below.
NOTE:
Equipment costs vary from vendor to vendor.
Company
Tool Name
Part Number
American Honda Motor Co., Inc.
Kwik-Lathe
108-0005-04
100 W. Alondra Blvd.
Power Feed*
108-0120-05
Gardena, CA 90248-2702
Attn:
Special Tools (Service Tool and Equipment Program) (800) 346-6327
Note:
Contact Special Tools for an order form.
Kwik-Way Manufacturing Co.
Kwik-Lathe
108-0005-04
500 57th Street
Power Feed*
108-0120-05
Marion, IA 52302 (800) 553-5953 (800) 332-5499 from Iowa
Snap-on Tools Corporation
Front Brake
2801 80th Street
Disc Lathe
YA 180
Kenosha, WI 5314-1410
Power Feed*
YA 189
(414) 656-5200
*Power feed is required to obtain an optimum finish.
RETURN INFORMATION
To return new equipment purchased from American Honda or Kwik-Way Manufacturing Co., be sure to follow Kwik-Way's "Returned Goods
Procedure" on the reverse side.
To return new equipment purchased from Snap-on Tools Corporation, contact your local Snap-on dealer.
KWIK-WAY RETURNED GOODS PROCEDURE
No returned goods will be accepted at Kwik-Way Manufacturing Co. without prior written approval.
CONDITIONS
1.
Only defective equipment and/or parts not repairable in the field still under warranty may be returned.
2.
Only stock adjustments for new, unused parts will be allowed.
3.
Equipment cannot be returned for stock adjustment.
PROCEDURE
1.
Telephone Allen Taylor, Kwik-Way Manufacturing Co., at 319-377-9421.
2.
Return equipment or parts freight prepaid with returned goods authorization documents to:
Kwik-Way Manufacturing Co. 755-26th Street Marion, IA 52302