Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
Blower Motor Switch: Service and Repair
Lever Type
CONTROL PANEL REMOVAL
1. Remove fan switch and control lever knobs, then pry heater control cover panel out, using a screwdriver.
2. Remove radio as follows:
a. Remove ashtray and ashtray holder.
b. Remove 2 screws from under center of instrument panel, then push radio assembly out of dash from behind.
c. Disconnect electrical connector and antenna lead, then remove radio assembly.
3. Remove 6 screws securing control panel.
4. Disconnect air mix and function cables from heater housing.
5. Disconnect electrical connectors, then remove control assembly.
6. Reverse procedure to install.
HEATER CONTROL PANEL DISASSEMBLY
Refer to illustration for component replacement.