Accord L4-1955cc 2.0L SOHC FI (1987)
Weatherstrip: All Technical Service Bulletins
Door - Torn Opening Seal
Model
'86-87 ACCORD
Applicable To
ALL
File Under
BODY
Bulletin No.
87-005
Issue Date
FEB 6, '87
PROBLEM
The door opening seal is torn.
CORRECTIVE ACTION
1.
Peel back the center pillar lining.
2.
Remove the damaged door opening seal.
3.
Using a wood block and a hammer, tap a 40 mm section of the flange inward (20 mm above and below the area of the tear). The inward deflection
should be approximately 5 mm.
4.
Install the new door opening seal using a weatherstrip adhesive such as 3M Super Weatherstrip Adhesive (3M Part No. 08008), then push the
center pillar lining in place.
WARRANTY CLAIM INFORMATION
Operation number:
816199
Flat rate time:
0.4 hour
Failed part H/C: Use the H/C of the Door Opening Seal you replace.
Defect code:
021
Contention code:
A01