Accord L4-1955cc 2.0L SOHC FI (1987)
Fuel Pressure Regulator: Service and Repair
Pressure Regulator Replacement
Warning: Do not smoke while working on fuel system. Keep open flame away from work area.
1. Disconnect the negative terminal of the battery.
2. Place a shop towel under the pressure regulator, then relieve fuel pressure.
3. Disconnect the vacuum hose and fuel return hose.
4. Remove the two 6 mm retainer bolts.
NOTE:
-
Replace the 0-ring.
-
When assembling the regulator, apply clean engine oil to the 0-ring and assemble it into its proper position, taking care not to damage the
0-ring.
