honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Case, M/T|Service and Repair|Page 2489 > < Bell Housing, M/T|Service and Repair|Page 2485
Page 1
background image

Case: Service and Repair

1. Remove transmission end cover.

NOTE:  Before removing mainshaft/countershaft locknuts, measure clearance between spacer collar and shoulder on fifth gear.

2. Bend locking tab on locknuts out of slots in main shaft and countershaft.

Case, M/T|Service and Repair|Page 2489 > < Bell Housing, M/T|Service and Repair|Page 2485