Accord L4-2.2L SOHC VTEC (1994)
Engine Control Module: Component Tests and General Diagnostics
Test Harness Installation
1. If the inspection for a particular failure code requires the Engine Control Module (ECM) test harness, remove the right door sill molding, the
small cover on the right kick panel, and pull the carpet back to expose the ECM.
2. Remove the ECM bracket. Connect the ECM test harness. Then check the system according to the procedure described for the appropriate code(s)
listed.
3. The purpose of the ECM test harness is to allow circuit testing without having to back-probe the ECM harness. If the ECM test harness is
unavailable, CAREFUL back probing of the ECM harness will have to be performed.