Accord L4-2.2L SOHC VTEC (1994)
Engine Control Module: Programming and Relearning
Removing The BACK-UP Fuse in the Under-hood Fuse/relay Box
After performing all necessary repairs, remove the "BACK UP" fuse (7.5A) from the under-hood fuse/relay box for 10 seconds. This will reset the
Engine Control Module fault code memory.
NOTE: Disconnecting the "BACK UP" fuse (7.5A) also cancels the anti-theft/radio presets and clock settings. Make note of the presets (and
anti-theft radio codes if so equipped) before removing the fuse.