Accord L4-2.2L SOHC VTEC (1994)
Air Bag Control Module: Service and Repair
CAUTION:
-
Before disconnecting any part of the SRS wire harness, connect the short connectors (RED) to the airbags.
-
Do not damage the SRS unit terminals or connectors.
-
Do not disassemble the SRS unit; it has no serviceable parts.
-
Store the SRS unit in a clean. dry area.
-
Do not use any SRS unit which has been subjected to water damage or shows signs of being dropped or improperly handled. such as
dents, cracks or deformation.
NOTE: The original radio has a coded theft protection circuit. Be sure to get the customer's code number before disconnecting the battery cables.
1. Disconnect the battery negative cable, then the p05itive cable.
2. Connect the short connectors to the airbags.
3. Pull down the carpeting from both sides of the heater unit and front console.
4. Disconnect the SRS main harness 18-P connector from the SRS unit.